Universal Push Button Canister
Product Number:
15-89
Universal push button canister for the these handpiece: #15-32 and #15-33. Also compatible with NSK (with the exception of the Alpha-Lite), Schein Master, Darby, Patterson, Dental Aire, Medidenta, True Speed, and other handpieces that use a standard Japanese style canister.
End cap is NOT included.
Made in the USA. Three month warranty.
Install Instructions for Universal Push Button Canister (PDF):
- Before replacing turbine, check handpiece for any dents. If there are any dents, contact American Dental Accessories for a handpiece repair.
- First use an end cap wrench to unscrew cap from handpiece, then remove worn turbine out the front (bur end).
- Inspect head of handpiece for any foreign debris or turbine components and remove if present.
- Thouroughly clean and lubricate interor of handpiece with lubricant cleaner.
- Then replace with new turbine. Align the "lock pin" or small dimple on the top of the canister with a small indentation on the inside of turbine cavity. If canister is not properly aligned, then damage may be caused to the handpiece.
- Holding handpiece face down, screw end cap back on and make sure it is flush against the handpiece.
- Before operating, install a bur securely into the turbine. If there is any resistance, then remove turbine and reinstall.
- Lastly, install handpece onto your tubing connector and operate foot control to test function. Lubricate handpiece appropriately.
Replacement Parts:
End cap (#15-89-C)
O-rings (#15-86-OR)
Bearing kit (#25-208)
Spindle with chuck and impeller (#25-312)
*For other parts available, please call.
Universal push button canister for the these handpiece: #15-32 and #15-33. Also compatible with NSK (with the exception of the Alpha-Lite), Schein Master, Darby, Patterson, Dental Aire, Medidenta, True Speed, and other handpieces that use a standard Japanese style canister.
End cap is NOT included.
Made in the USA. Three month warranty.
Install Instructions for Universal Push Button Canister (PDF):
- Before replacing turbine, check handpiece for any dents. If there are any dents, contact American Dental Accessories for a handpiece repair.
- First use an end cap wrench to unscrew cap from handpiece, then remove worn turbine out the front (bur end).
- Inspect head of handpiece for any foreign debris or turbine components and remove if present.
- Thouroughly clean and lubricate interor of handpiece with lubricant cleaner.
- Then replace with new turbine. Align the "lock pin" or small dimple on the top of the canister with a small indentation on the inside of turbine cavity. If canister is not properly aligned, then damage may be caused to the handpiece.
- Holding handpiece face down, screw end cap back on and make sure it is flush against the handpiece.
- Before operating, install a bur securely into the turbine. If there is any resistance, then remove turbine and reinstall.
- Lastly, install handpece onto your tubing connector and operate foot control to test function. Lubricate handpiece appropriately.
Replacement Parts:
End cap (#15-89-C)
O-rings (#15-86-OR)
Bearing kit (#25-208)
Spindle with chuck and impeller (#25-312)
*For other parts available, please call.