Stainless Steel SE Valve

Plastic lever style stainless steel saliva ejector (SE) valve with variable on/off vacuum control and 360° swivel base connector.

Autoclavable valve is easily disassembled for cleaning and may be cleaned by sonic methods. After each disinfection, disassemble, clean, and thoroughly flush with water and lubricate all moving parts with a silicone based lubricant.

Installation Instructions for Lever Style SE Valve (PDF):

1. Shut off the vacuum.
2. Cut tubing and remove existing stainless steel SE valve.
3. Attach the valve to the tubing. Inserting tubing ends in hot water and/or the use of soap will aid in this process.

Replacement Parts:

• On/off lever (#03-91)
• Aluminum base connector (#03-24A)
• White delrin base connector #03-24)
• Anti-back flow base connector (#05-63)
• Base connector and tip o-ring (#03-43)
• SE valve cylinder (#03-925)
• SE valve cylinder o-ring (#03-19-SE)
• Rubber saliva ejector tip (#03-31 or #03-32)
• Alcryn saliva ejector tip (#03-37 or #03-38)
• Plastic debris basket (#18-99)