Standard Fiberoptic Handpiece

Wrench chuck style 400,000 RPM standard fiberoptic handpiece with a 5 hole screw-on, non-swivel connector.

Product Details:

• Standard size head with dual port fiberoptics.
• Gripped surface provides excellent tacticity.
• One year warranty on handpiece and a three month warranty on the canister.
• Includes: bur wrench.
• Autoclavable.

Operating Instructions for Standard High-speed Handpiece (PDF):

1. Place the front of the bur wrench provided with the handpiece over the front of the handpiece. The bur wrench has a square notch which will fit over the front of the turbine spindle which protrudes from the front of the handpiece. The square shaft of the bur wrench can then be inserted into the back end of the handpiece head to loosen the chuck by rotating counter-clockwise.
2. Insert bur fully into loosened chuck.
3. Tighten chuck by rotating bur wrench clockwise until snug.
4. Gently pull on bur with fingers to assure it is secured.

Replacement Parts:

• Canister (#15-80)
• Turbine (#15-86)
• Connector gasket (#12-21)
• Bur wrench (#15-72)
• End cap (#15-80-C)
• End cap wrench (#15-97-W)