Vacuum Shock & Clean ™ by Palmero is a two-step evacuation cleaning system for weekly and monthly use. Keeps your evacuation lines clean and functioning at peak efficiency.
Product Details:
- Keeps the high volume (HVE) and saliva ejector (SE) valves clean and run smoothly.
- Vacuum Shock breaks up any accumulated debris (use 1 tablet monthly).
- Vacuum Clean keeps the evacuation lines fresh and functioning (use 1 tablet weekly).
- Vacuum Clean can also be used as a cost effective high/low speed line cleaner from tip to trap.
- When both vacuum line cleaners are used correctly, the time-release formulation ensures the line is protected at all times.
Product Contents:
Vacuum Shock Instructions (Step 1):
TO CLEAN EVACUATION TRAP:
- Locate evacuation trap in operatory, which is usually near the chair. Remove lid, insert new trap if needed.
- Then insert one Vacuum Shock tablet in each evacuation trap and replace lid.
- Turn pump on and vacuum up approx. one gallon of warm/hot water through the speed lines.
- Lastly turn pump off and empty buildup in main pump filter after cleaning HVE line.
TO CLEAN CUSPIDOR: May take 3-5 dyas to dissolve in the trap. When tablet completely dissolves, resume use of Vacuum Clean as directed.
Vacuum Clean Instructions (Step 2):
TO CLEAN EVACUATION TRAP:
- Turn vacuum pump off.
- Locate evacuation trap in operatory, which is usually near the chair. Remove lid, insert new trap if needed.
- Then insert one Vacuum Clean tablet in evacuation trap and replace lid.
- Turn pump on. Tablet is now activated.
- Insert new tablet every 3-5 days, depending on usage.
TO CLEAN HIGH/LOW SPEED TIMES:
- Dissolve 5 tablets in a 16 oz. dispenser and add hot water. Two ounces of concentrated solution equals one gallon of antimicrobial rinse.
- Aspirate 1 quart per operatory in order to treat HVE and SE lines.