Lever Style SE Valve (Non-Autoclavable)

Non-autoclavable, lever style on/off saliva ejector (SE) valve with a 360° swivel base connector. Connector is made out of Delrin. White colored.

Installation Instructions (PDF):

1. Shut off vacuum.
2. Cut valve tubing and remove existing valve.
3. Attach new lever style SE valve to the tubing. Inserting tubing ends in hot water and/or the use soap will assist in this process.

TECH TIP: After every disinfection, disassemble, clean, and thoroughly flush with water. Then lubricate all the moving parts with silicone based lubricant.

Replacement Parts for Saliva Ejector Valve:

• On/off lever (#03-91)
• White delrin base connector (#03-24)
• Base o-ring (#03-43)
• Rubber saliva ejector tip (#03-32)
• Alcryn saliva ejector tip (#03-37)
• Plastic debris basket (#18-99)