This was just what I needed to connect an older dental unit to our waterline. Ended up getting a few extra as backup.
Needle Routing Valve
Price
Regular price
$19.95
Quantity
Couldn't load pickup availability
Needle routing valve provides precise variable control of air or water volume on a dental delivery unit.
Product Details:
- Use with 1/8" or 1/4" tubing.
- Includes: large and small barbs, large and small tubing clamps, and gaskets included.
- For a replacement knob, see #05-19.
Instructions (PDF):
- Shut off your delivery unit by depressing the buttons on the air/water syringe.
- Cut the tubing as close to the old toggle with a wire cutter and remove the toggle. Make sure to note which tubing connects to the inlet and outlet.
- Install the appropriate sized barbs with washers and tighten securely with a 1/4" open ended wrench.
- Apply liquid soap to the tubing or dip the ends in hot water. Slip the sleeve clamps over the tubing (approximately 3/8" from the end), which ensures the interior bevel of the sleeve clamp faces the barb.
- Slip tubing over barbs and lock tubing by using a pliers or sleeve tool to slide the sleeve clamps over tubing and barb.
- Mount to the delivery unit using provided nut.
- Finally, turn the unit on in order to test for leaks and proper function.
Needle routing valve provides precise variable control of air or water volume on a dental delivery unit.
Product Details:
- Use with 1/8" or 1/4" tubing.
- Includes: large and small barbs, large and small tubing clamps, and gaskets included.
- For a replacement knob, see #05-19.
Instructions (PDF):
- Shut off your delivery unit by depressing the buttons on the air/water syringe.
- Cut the tubing as close to the old toggle with a wire cutter and remove the toggle. Make sure to note which tubing connects to the inlet and outlet.
- Install the appropriate sized barbs with washers and tighten securely with a 1/4" open ended wrench.
- Apply liquid soap to the tubing or dip the ends in hot water. Slip the sleeve clamps over the tubing (approximately 3/8" from the end), which ensures the interior bevel of the sleeve clamp faces the barb.
- Slip tubing over barbs and lock tubing by using a pliers or sleeve tool to slide the sleeve clamps over tubing and barb.
- Mount to the delivery unit using provided nut.
- Finally, turn the unit on in order to test for leaks and proper function.