Lubrina 2 Handpiece Maintenance System

Lubrina 2 system by Morita automatically performs handpiece maintenance (lubricating and cleaning) for up to four handpieces in a short amount of time. Its clean air-blow system implements lubrication and cleaning of the inside of each handpiece. This saves your staff time from having to do manual handpiece maintenance.

Since the air-blow system removes residual water completely using clean air. The efficiency of lubrication is enhanced with oil usage only 1/4 of that compared to manual lubrication.

Product Details:

• Accepts multiple brands of spray lubricant.
• Cleans one turbine in approximately 20 seconds.
• Compatible with 4-hole, 5-hole, and 6-pin connections.
• With its dual lubrication system, one or two different brands of spray may be used in the same cycle. Several brands of spray are compatible by using an optional spray holder adapter.
• The double-conduit design allows the clean air-blow system to achieve clean air.
• Lubrina 2 offers a noise reduction of 15dB during operation compared to the original model.

Technical Information:

• Power Voltage: AC 100V-240V 50-60Hz
• Power Consumption: 10-25 VA
• Maximum Input Air Pressure: 0.7 MPa max.
• Air Pressure Used: 0.3-0.5 MPa (recommended 0.4 MPa)
• Consumed Air Flow Rate: 60-100 NL / min (0.3-0.5 MPa)
• Weight: 17.6 lbs
• External Dimensions (Approximately): 12" W x 12" D x 14" H

Manufacturer User's Manual (link)

SHIPPING: Lubrina 2 Handpiece Maintenance System ships directly from the manufacturer. Please allow 2-3 weeks for delivery. If returned, a 15% restocking fee will apply.