Belmed Nitrous System (Without Yoke Block)

Belmed nitrous system without yoke mounts on a mobile stand and is for non-mobile use room-to-room. Oxygen and nitrous does not attach to stand. For mobile nitrous use, see #71-490.

Flow rates can be reduced to as low as 1 liter per minute to match patient breathing volumes, while still maintaining a minimum of 30% oxygen and 70% maximum nitrous oxide. Increase or decrease flow rate while still maintaining pre-selected percentages. Features an oxygen fail-safe.

Nitrous System Includes: Belmed flowmeter head (#71-39), stand, reservoir bag (#71-41), scavenging circuit, breathing tube, and an autoclavable nasal hood. Does NOT include nitrous/oxygen tubing to connect to the wall outlet. See HERE for nitrous system tubing. Also, does NOT include a yoke block.

Specifications:

• Head dimensions: 8-3/4" H X 3-3/4" W X 10-1/4" D
• Bag and Outlet Diameter: 22mm - Approx. 7/8”
• Oxygen flow range: 0-10 LPM
• Nitrous flow range: 0-7 LPM

• Installation for Belmed nitrous system with stand is quick and easy.
• Nitrous system unit interconnects between the flowmeter and oxygen supply hose. Special tools not required for installation.
• One year warranty.

RETURNS: If returned, then a 30% restocking fee will apply.