We needed a part to fix an issue for an air/water syringe and were able to find it at ADAI! This was after asking our Patterson rep and it ended up saving us quite a bit of money to replace it ourselves. Shipping took a little bit longer than expected, but overall we were very pleased with the service and the part! Thanks again!
Two-Way Routing Valve
Price
Regular price
$31.95
Quantity
Couldn't load pickup availability
Two-way routing valve for air or water. Has a couple of configurations: (1) configured to have two ports coming in and one going out and (2) one port coming in and two ports going out.
Product Details:
- For use with water bottle systems to switch bottles on dual systems or to switch from bottled water to city water, and handpiece delivery systems to switch handpieces.
- Use with 1/8" or 1/4" tubing, large and small barbs, large and small tubing clamps, and gaskets included.
Installation Instructions (PDF):
- Shut off your delivery unit and depressurize by depressing the buttons on the air/water syringe.
- Cut the tubing close to the old toggle, using a wire cutter, and remove existing toggle. Make sure to not where each tube connects to the inlet and outlet.
- Next, install the appropriately sized barbs with washers and tighten securely with a 1/4" open-ended wrench.
- Apply liquid soap or hot water to tubing in order to slip the sleeve clamps easily over the tubing (approximately 3/8" from the end). Ensure the interior bevel of the sleeve clamp faces the barb.
- Then slip the tubing over the barbs and lock the tubing using a pliers or sleeve tool to slide the clamps over tubing and barb.
- Lastly, mount the toggle valve to the unit using the provided nut.
- Turn on your unit in order to test proper function and leaks.
Two-way routing valve for air or water. Has a couple of configurations: (1) configured to have two ports coming in and one going out and (2) one port coming in and two ports going out.
Product Details:
- For use with water bottle systems to switch bottles on dual systems or to switch from bottled water to city water, and handpiece delivery systems to switch handpieces.
- Use with 1/8" or 1/4" tubing, large and small barbs, large and small tubing clamps, and gaskets included.
Installation Instructions (PDF):
- Shut off your delivery unit and depressurize by depressing the buttons on the air/water syringe.
- Cut the tubing close to the old toggle, using a wire cutter, and remove existing toggle. Make sure to not where each tube connects to the inlet and outlet.
- Next, install the appropriately sized barbs with washers and tighten securely with a 1/4" open-ended wrench.
- Apply liquid soap or hot water to tubing in order to slip the sleeve clamps easily over the tubing (approximately 3/8" from the end). Ensure the interior bevel of the sleeve clamp faces the barb.
- Then slip the tubing over the barbs and lock the tubing using a pliers or sleeve tool to slide the clamps over tubing and barb.
- Lastly, mount the toggle valve to the unit using the provided nut.
- Turn on your unit in order to test proper function and leaks.
