Part for film developer came in quickly and in good condition.
Exactly what I needed. I had to reverse the hoses, but other than that, it was perfect.
Kavo & Vector Turbine
Price
Regular price
$109.95
Quantity
Couldn't load pickup availability
Replacement turbine for Kavo and Vector high-speed push button handpieces. Fits models: Kavo 632/633/639/642/643/645 and Vector F4/F7/V8/V9 styles.
Product Details:
- End cap NOT included.
- Made in the USA.
- Has a 6 month warranty.
Installation Instructions of Kavo & Vector Turbine (PDF):
- Using specialized wrench provided with your handpiece, unscrew cap from handpiece head and remove worn turbine by pushing out from the front. Only use the appropriate tool to remove the end cap.
- Then inspect the interior of head for foreign material and debris — remove if present. Compare worn turbine to new turbine to identify any components that may still be present in your handpiece. Use a scaler or explorer to remove all old turbine components including any shims, o-rings, washers, or bearing retainers.
- Generously lubricate the interior of the handpiece, paying particular attention to the o-rings.
- Holding handpiece face down, insert turbine fully into handpiece head. The turbine bearings each have a small lip, which will rest against the o-rings. Using the appropriate tool, screw end cap down until flush against handpiece head.
Replacement Parts: end cap (#25-98-C), end cap wrench (#15-98-W), bearing kit (#25-204), turbine o-rings (#15-81-OR), spindle with chuck and impeller (#25-310).
Kavo & Vector Turbine: a surgical & restoratives product from Quality Dental Services that restorative dentists tend to standardize on once they have tried it in a clinical setting. For offices that track surgical & restoratives spend by vendor, Quality Dental Services products tend to deliver lower total cost of ownership when factoring in consistency and fewer returns.
Replacement turbine for Kavo and Vector high-speed push button handpieces. Fits models: Kavo 632/633/639/642/643/645 and Vector F4/F7/V8/V9 styles.
Product Details:
- End cap NOT included.
- Made in the USA.
- Has a 6 month warranty.
Installation Instructions of Kavo & Vector Turbine (PDF):
- Using specialized wrench provided with your handpiece, unscrew cap from handpiece head and remove worn turbine by pushing out from the front. Only use the appropriate tool to remove the end cap.
- Then inspect the interior of head for foreign material and debris — remove if present. Compare worn turbine to new turbine to identify any components that may still be present in your handpiece. Use a scaler or explorer to remove all old turbine components including any shims, o-rings, washers, or bearing retainers.
- Generously lubricate the interior of the handpiece, paying particular attention to the o-rings.
- Holding handpiece face down, insert turbine fully into handpiece head. The turbine bearings each have a small lip, which will rest against the o-rings. Using the appropriate tool, screw end cap down until flush against handpiece head.
Replacement Parts: end cap (#25-98-C), end cap wrench (#15-98-W), bearing kit (#25-204), turbine o-rings (#15-81-OR), spindle with chuck and impeller (#25-310).
Kavo & Vector Turbine: a surgical & restoratives product from Quality Dental Services that restorative dentists tend to standardize on once they have tried it in a clinical setting. For offices that track surgical & restoratives spend by vendor, Quality Dental Services products tend to deliver lower total cost of ownership when factoring in consistency and fewer returns.