Package was delivered on time but just received them today. Items are as described. Value for money. Happy with mu purchase.
On/Off Momentary Toggle (A-dec Style)
Price
Regular price
$32.95
Quantity
Couldn't load pickup availability
Momentory on/off toggle for use with the A-dec ® Century II™ purchased after 1982. Momentary toggle, switch returns to off position when released.
Product Details:
- For use with air or water to activate bowl rinse, cup fillers, purges, etc.
- May be used with 1/8" or 1/4" tubing, large and small barbs, large and small tubing clamps, and gaskets included.
Installation Instructions (PDF):
- Shut off your delivery unit and depressurize by depressing the buttons on the air/water syringe.
- Cut the tubing close to the old toggle, using a wire cutter, and remove existing toggle. Make sure to not where each tube connects to the inlet and outlet.
- Next, install the appropriately sized barbs with washers and tighten securely with a 1/4" open-ended wrench.
- Apply liquid soap or hot water to tubing in order to slip the sleeve clamps easily over the tubing (approximately 3/8" from the end). Ensure the interior bevel of the sleeve clamp faces the barb.
- Then slip the tubing over the barbs and lock the tubing using a pliers or sleeve tool to slide the clamps over tubing and barb.
- Lastly, mount the toggle valve to the unit using the provided nut.
- Turn on your unit in order to test proper function and leaks.
Momentory on/off toggle for use with the A-dec ® Century II™ purchased after 1982. Momentary toggle, switch returns to off position when released.
Product Details:
- For use with air or water to activate bowl rinse, cup fillers, purges, etc.
- May be used with 1/8" or 1/4" tubing, large and small barbs, large and small tubing clamps, and gaskets included.
Installation Instructions (PDF):
- Shut off your delivery unit and depressurize by depressing the buttons on the air/water syringe.
- Cut the tubing close to the old toggle, using a wire cutter, and remove existing toggle. Make sure to not where each tube connects to the inlet and outlet.
- Next, install the appropriately sized barbs with washers and tighten securely with a 1/4" open-ended wrench.
- Apply liquid soap or hot water to tubing in order to slip the sleeve clamps easily over the tubing (approximately 3/8" from the end). Ensure the interior bevel of the sleeve clamp faces the barb.
- Then slip the tubing over the barbs and lock the tubing using a pliers or sleeve tool to slide the clamps over tubing and barb.
- Lastly, mount the toggle valve to the unit using the provided nut.
- Turn on your unit in order to test proper function and leaks.