Midwest 8000 & 8000i Turbine

Midwest 8000 and 8000i Turbine wrench chuck style turbine. For use with both the fiber optic and the non-fiber optic handpieces. Includes end cap.

Made in USA. Has a 6 month warranty.

Installation Instructions (PDF):

1. Using the specialized wrench provided with your handpiece, unscrew cap from handpiece head and then remove worn turbine by pushing out from the front.
2. Remove any foreign material and debris. Compare worn turbine to new turbine to identify any components that may still be present in your handpiece. Use a scaler or explorer to remove all old turbine components including any shims, o-rings, washers, or bearing retainers.
3. Once all old turbine components have been removed, use a cotton swab and handpiece lubricant to clean handpiece head. Using air from the air/water syringe, blow out handpiece head to remove any cotton fibers.
4. Also generously lubricate the turbine.
5. Then holding the handpiece face down, carefully insert the turbine fully into the handpiece head.
6. Once the turbine is fully seated, use the appropriate tool to screw the end cap down until flush against the handpiece head.
7. If you are unable to fully seat the end cap, remove and check the end cap for debris/old turbine components. Then repeat process.

Replacement Parts for Midwest 8000 & 8000i Turbine:
End cap wrench (#15-97-W)
Bur wrench (#15-71)
Bearings (#25-202)
Bearing cup (#25-297)
Spindle (#25-304)
Impeller (#25-403)
*Other parts available, please call.

Ask any restorative dentists what they need from their surgical & restoratives supplies and the answer usually comes back to ease of placement. The Midwest 8000 & 8000i Turbine from Handpiece Parts & Products delivers on that front. For offices that track surgical & restoratives spend by vendor, Handpiece Parts & Products products tend to deliver lower total cost of ownership when factoring in consistency and fewer returns.