This was just what I needed to connect an older dental unit to our waterline. Ended up getting a few extra as backup.
These are the brightest, lightest mirrors i have ever used. I hate using anything else now.
Lens Shield (Pelton & Crane LF-II)
Price
Regular price
$9.95
Quantity
Couldn't load pickup availability
Lens shield is compatible with the Pelton and Crane LF-II operating light. Two-piece lens shield made of high grade Lexan construction.
Installation Instructions of Lens Shield:
- First, turn operating light off. Light can be hot if it has been in use.
- Locate lock pin on dental light head and push down, so the light head opens.
- Pinch the lens shield on either side and lift out.
- When preparing the new lens shield, make sure to remove the protective film on both sides of the shield.
- When lens shield is ready to be installed, put flat end in first and press sides into place.
- Repeat step 5 for second part of the lens shield.
- Lastly, close the light head and reinsert locking pin.
NOTE: For a Pelton & Crane lens shield for the LF-I model, see #LS-3.
Lens shield is compatible with the Pelton and Crane LF-II operating light. Two-piece lens shield made of high grade Lexan construction.
Installation Instructions of Lens Shield:
- First, turn operating light off. Light can be hot if it has been in use.
- Locate lock pin on dental light head and push down, so the light head opens.
- Pinch the lens shield on either side and lift out.
- When preparing the new lens shield, make sure to remove the protective film on both sides of the shield.
- When lens shield is ready to be installed, put flat end in first and press sides into place.
- Repeat step 5 for second part of the lens shield.
- Lastly, close the light head and reinsert locking pin.
NOTE: For a Pelton & Crane lens shield for the LF-I model, see #LS-3.