Kavo 6500 Push Button Turbine
Price
Regular price
$108.95
Quantity
Couldn't load pickup availability
Replacement turbine for the Kavo 6500 push button high-speed handpieces.
Product Details:
- End cap NOT included.
- Made in the USA.
- Turbine has a 6 month warranty.
Installation Instructions (PDF):
- Using specialized wrench provided with your handpiece, unscrew cap from handpiece head and remove worn turbine by pushing out from the front.
- If debris remains inside the head, then remove if present. Compare worn turbine to new turbine to confirm and identify components remaining.
- Use a scaler or explorer instrument to remove all old turbine components including any shims, o-rings, washers or bearing retainers.
- Once all old turbine components have been removed, use a cotton swab and handpiece lubricant to clean handpiece head. Using air from the air/water syringe, blow out handpiece head to remove any cotton fibers.
- Holding handpiece face down, insert turbine fully into handpiece head.
- The turbine bearings each have a small lip which will rest against the o-rings. Using the appropriate tool, screw end cap down until flush against handpiece head.
Replacement turbine for the Kavo 6500 push button high-speed handpieces.
Product Details:
- End cap NOT included.
- Made in the USA.
- Turbine has a 6 month warranty.
Installation Instructions (PDF):
- Using specialized wrench provided with your handpiece, unscrew cap from handpiece head and remove worn turbine by pushing out from the front.
- If debris remains inside the head, then remove if present. Compare worn turbine to new turbine to confirm and identify components remaining.
- Use a scaler or explorer instrument to remove all old turbine components including any shims, o-rings, washers or bearing retainers.
- Once all old turbine components have been removed, use a cotton swab and handpiece lubricant to clean handpiece head. Using air from the air/water syringe, blow out handpiece head to remove any cotton fibers.
- Holding handpiece face down, insert turbine fully into handpiece head.
- The turbine bearings each have a small lip which will rest against the o-rings. Using the appropriate tool, screw end cap down until flush against handpiece head.