Benco or Healthco Push N' Swivel Canister

Replacement canister for the Benco or Healthco Push N' Swivel handpiece. Does NOT include the end cap.

Made in the USA. Has a 6 month warranty.

Installation Instructions (PDF):

1. First, using end cap wrench, unscrew cap from handpiece head and remove worn turbine by pushing out from the front (bur end). Use of a pliers or inappropriate tool will cause damage to the handpiece.
2. Inspect interior of handpiece head of foreign material and debris. Remove if debris is present.
3. The lock pin should line up with a small indentation on the inside at the top of the Benco or Healthco Push N' Swivel canister cavity. If not properly aligned, damage may be caused to the handpiece and/or turbine preventing proper function.
4. Holding handpiece face down, screw end cap until flush against handpiece head. CAUTION: Securely tighten the end cap with wrench to ensure safe positioning of turbine.
5. Before operating handpiece, install bur securely into turbine. Roll the bur between fingers to make sure bearing turns freely. If you feel any resistance, remove turbine and reinstall.
6. Install handpiece onto your tubing connector and operate foot control.
7. Lubricate handpiece with handpiece lubricant.