Asepsis Air/Water Syringe

Universal asepsis air/water syringe attaches to all delivery units and uses any universal tip (disposable or autoclavable). Change syringe tip by pushing in and pulling out - no tightening required.

High quality plated brass construction.

One year warranty.

Installation Instructions (PDF):

1. First, shut delivery unit off and relieve pressure in existing air/water syringe. Depress both buttons until flow stops.
2. Disconnect existing syringe by unscrewing handle and cut the tubing directly below the syringe head. Take care to note which tubing is for water and which is air.
3. Insert syringe tubing through handle. Slip sleeve clamps over each line approximately 3/8” from the end.
4. Slip tubing over barbs and lock tubing, by sliding sleeve clamps over tubing portion on the barb with a pliers or sleeve tool.
5. Lastly, turn delivery unit on and test for leaks and proper function.

Repair Parts for Asepsis Air/Water Syringe:
air/water syringe repair kit (#01-49)
syringe button (#01-35)
syringe button spring (#01-35-S).