Midwest 8000 & 8000i Turbine is a wrench chuck style turbine. For use with both the fiber optic and the non-fiber optic handpieces. Includes end cap.
Made in USA. Has a 6 month warranty.
Installation Instructions (PDF):
- Using the specialized wrench provided with your handpiece, unscrew cap from handpiece head and then remove worn turbine by pushing out from the front.
- Remove any foreign material and debris. Compare worn turbine to new turbine to identify any components that may still be present in your handpiece. Use a scaler or explorer to remove all old turbine components including any shims, o-rings, washers, or bearing retainers.
- Once all old turbine components have been removed, use a cotton swab and handpiece lubricant to clean handpiece head. Using air from the air/water syringe, blow out handpiece head to remove any cotton fibers.
- Also generously lubricate the turbine.
- Then holding the handpiece face down, carefully insert the turbine fully into the handpiece head.
- Once the turbine is fully seated, use the appropriate tool to screw the end cap down until flush against the handpiece head.
- If you are unable to fully seat the end cap, remove and check the end cap for debris/old turbine components. Then repeat process.
Replacement Parts for Midwest 8000 & 8000i Turbine:
End cap wrench (#15-97-W)
Bur wrench (#15-71)
Bearings (#25-202)
Bearing cup (#25-297)
Spindle (#25-304)
Impeller (#25-403)
*Other parts available, please call.
Midwest 8000 & 8000i Turbine is a wrench chuck style turbine. For use with both the fiber optic and the non-fiber optic handpieces. Includes end cap.
Made in USA. Has a 6 month warranty.
Installation Instructions (PDF):
- Using the specialized wrench provided with your handpiece, unscrew cap from handpiece head and then remove worn turbine by pushing out from the front.
- Remove any foreign material and debris. Compare worn turbine to new turbine to identify any components that may still be present in your handpiece. Use a scaler or explorer to remove all old turbine components including any shims, o-rings, washers, or bearing retainers.
- Once all old turbine components have been removed, use a cotton swab and handpiece lubricant to clean handpiece head. Using air from the air/water syringe, blow out handpiece head to remove any cotton fibers.
- Also generously lubricate the turbine.
- Then holding the handpiece face down, carefully insert the turbine fully into the handpiece head.
- Once the turbine is fully seated, use the appropriate tool to screw the end cap down until flush against the handpiece head.
- If you are unable to fully seat the end cap, remove and check the end cap for debris/old turbine components. Then repeat process.
Replacement Parts for Midwest 8000 & 8000i Turbine:
End cap wrench (#15-97-W)
Bur wrench (#15-71)
Bearings (#25-202)
Bearing cup (#25-297)
Spindle (#25-304)
Impeller (#25-403)
*Other parts available, please call.