Midwest Quiet Air Turbine
Midwest Quiet Air Turbine

Midwest Quiet Air Turbine

$79.95
Regular price

SKU#:

15-82
Unit price  per 

Midwest Quiet Air turbine is a wrench chuck style. For use with both the fiber optic and the non-fiber optic Midwest Quiet Air handpieces.

Product Details:

  • End cap included (see #15-82-C).
  • Made in USA.
  • Has a 6 month warranty.

Installation Instructions (PDF):

  1. Using specialized wrench provided with your handpiece, unscrew cap from handpiece head, and then remove worn turbine by pushing out from the front.
  2. Remove foreign material and debris from interior of handpiece head. Compare worn turbine to new turbine to identify any components that may still be present in your handpiece. Use a scaler or explorer to remove all old turbine components including any shims, o-rings, washers, or bearing retainers.
  3. Once all old turbine components have been removed, use a cotton swab and handpiece lubricant to clean handpiece head. Using air from the air/water syringe, blow out handpiece head to remove any cotton fibers.
  4. Remove old o-ring(s) and then install new o-ring(s).
  5. Place new copper washer on the front of the turbine, so that the edges of the washer curve away from the turbine.
  6. Generously lubricate the turbine, paying particular attention to the o-ring.
  7. Holding the Midwest Quiet Air turbine bur end up, carefully insert the turbine fully into the handpiece head. It may be necessary to use a slight wiggling motion to fully seat the turbine.
  8. Finally once the turbine is fully seated, use the appropriate tool to screw the end cap down until flush against the handpiece head.

Replacement Parts: end cap wrench (#15-82-W), bur wrench (#15-70), turbine o-rings (15-82-OR), bearings (#25-200), spindle (#25-300), impeller (#25-400), & chuck (#15-851). For other parts available, please call.

Midwest Quiet Air turbine is a wrench chuck style. For use with both the fiber optic and the non-fiber optic Midwest Quiet Air handpieces.

Product Details:

  • End cap included (see #15-82-C).
  • Made in USA.
  • Has a 6 month warranty.

Installation Instructions (PDF):

  1. Using specialized wrench provided with your handpiece, unscrew cap from handpiece head, and then remove worn turbine by pushing out from the front.
  2. Remove foreign material and debris from interior of handpiece head. Compare worn turbine to new turbine to identify any components that may still be present in your handpiece. Use a scaler or explorer to remove all old turbine components including any shims, o-rings, washers, or bearing retainers.
  3. Once all old turbine components have been removed, use a cotton swab and handpiece lubricant to clean handpiece head. Using air from the air/water syringe, blow out handpiece head to remove any cotton fibers.
  4. Remove old o-ring(s) and then install new o-ring(s).
  5. Place new copper washer on the front of the turbine, so that the edges of the washer curve away from the turbine.
  6. Generously lubricate the turbine, paying particular attention to the o-ring.
  7. Holding the Midwest Quiet Air turbine bur end up, carefully insert the turbine fully into the handpiece head. It may be necessary to use a slight wiggling motion to fully seat the turbine.
  8. Finally once the turbine is fully seated, use the appropriate tool to screw the end cap down until flush against the handpiece head.

Replacement Parts: end cap wrench (#15-82-W), bur wrench (#15-70), turbine o-rings (15-82-OR), bearings (#25-200), spindle (#25-300), impeller (#25-400), & chuck (#15-851). For other parts available, please call.